+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 23024 CC/W33: ⌀120 × ⌀180 × 46 mm⌀180⌀1204623024 CC/W33
Fig. 1: 23024 CC/W33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 23024 CC/W33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing SKF 23024 CC/W33

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 7 approximate
d
120 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
180 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
46 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
C
355 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 120 × 180 × 46 from other brands

9 products
Cross-section drawing to size: Spherical roller, 120 × 180 × 46 mm
You are viewingSKF 23024 CC/W33

Everything the number specifies matches: series 230, 120 × 180 × 46 mm, open, no protection, normal clearance, special design. The codes in the number are read against the SKF catalogue.

  • Cross-section drawing to size: Spherical roller, 120 × 180 × 46 mm23024 CC/W33This bearingSKF120 × 180 × 46available to orderon requestyou are here
  • Cross-section drawing to size: Spherical roller, 120 × 180 × 46 mm23024 W33no brand120 × 180 × 46available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 120 × 180 × 46mm
Cdynamic 355kN

Spherical roller bearing 23024. Under GOST the same bearing is designated 3003124.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 3003124?

It is the same bearing under GOST 3189-89: 3003124 corresponds to the ISO base 23024. Size 120 × 180 × 46 mm, a full equivalent of 23024.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet