+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of 23024-2RS5/VT143B: ⌀120 × ⌀180 mm⌀180⌀12023024-2RS5/VT143B2RS
Fig. 1: 23024-2RS5/VT143B, simplified drawing per ISO 8826-1; width not specified — outline drawn to the proportions of the type. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 23024-2RS5/VT143B

Load: radial high; axial medium, on both sidesSpherical roller

Bearing SKF 23024-2RS5/VT143B

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 1 approximate
d
120 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
180 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
Seal
2RSrubber, both sides
C
355 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 120 × 180 from other brands

9 products
Type diagram, no dimensions: spherical
You are viewingSKF 23024-2RS5/VT143B

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Spherical roller, 120 × 180 × 46 mm23024 CDE4C3S11open, no protectionNSK120 × 180 × 46available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 120 × 180mm
Cdynamic 355kN

Spherical roller bearing 23024-2RS5/VT143B, design 2RS: contact seals on both sides.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet