+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 22330 CC/W33: ⌀150 × ⌀320 × 108 mm⌀320⌀15010822330 CC/W33
Fig. 1: 22330 CC/W33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22330 CC/W33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing SKF 22330 CC/W33

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 13 approximate
d
150 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
320 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
108 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
C
1,460 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 150 × 320 × 108 from other brands

14 products
Cross-section drawing to size: Spherical roller, 150 × 320 × 108 mm
You are viewingSKF 22330 CC/W33

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Spherical roller, 150 × 320 × 108 mm22330 CA/W33CA, lubrication groove and holesCT150 × 320 × 10863 pcs€189.79Request a quote
  • Cross-section drawing to size: Spherical roller, 150 × 320 × 108 mm22330 CAW33CA, lubrication groove and holesNTE150 × 320 × 10810 pcs€276.94Request a quote
  • Cross-section drawing to size: Spherical roller, 150 × 320 × 108 mm22330 MBW33 PQMB, lubrication groove and holes, PQ: not decodedNTE150 × 320 × 10816 pcs€379.76Request a quote
  • Cross-section drawing to size: Spherical roller, 150 × 320 × 108 mm22330 MBW33MB, lubrication groove and holesNTE150 × 320 × 108available to order€310.38Request a quote
  • Cross-section drawing to size: Spherical roller, 150 × 320 × 108 mm22330 MAW33C4 VBclearance C4, MA, lubrication groove and holes, VB: not decodedCT150 × 320 × 108available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 22330CW3322330CW33CW33CT150 × 320 × 108available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 150 × 320 × 108 mm22330 MW33M, lubrication groove and holesCT150 × 320 × 108available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 150 × 320 × 108 mm22330 MBW33MB, lubrication groove and holesKG150 × 320 × 108available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 150 × 320 × 108 mm22330 MBW33C3clearance C3, MB, lubrication groove and holesKG150 × 320 × 108available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 150 × 320 × 108 mm22330 MAW33C4 VBclearance C4, MA, lubrication groove and holes, VB: not decodedNTE150 × 320 × 108available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 150 × 320 × 108mm
Cdynamic 1,460kN

Spherical roller bearing 22330. Under GOST the same bearing is designated 3630.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 3630?

It is the same bearing under GOST 3189-89: 3630 corresponds to the ISO base 22330. Size 150 × 320 × 108 mm, a full equivalent of 22330.

Will 22330 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet