+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 22320 E: ⌀100 × ⌀215 × 73 mm⌀215⌀1007322320 E
Fig. 1: 22320 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22320 E

Load: radial high; axial medium, on both sidesSpherical roller

Bearing SKF 22320 E

€351.07per piece
In stock: 11 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 25 approximate
d
100 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
215 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
73 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
847 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
950 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
m
13.5 kg
MassWeight of the product. Source: two supplier sources
01

Equivalents

the same size 100 × 215 × 73 from other brands

26 products
Photo: 22320 E
You are viewingSKF 22320 E
€351.07baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Spherical roller, 100 × 215 × 73 mm22320 CA/W33CA, lubrication groove and holesCT100 × 215 × 7358 pcs€53.71−€297.36Request a quote
  • Cross-section drawing to size: Spherical roller, 100 × 215 × 73 mm22320 CAW33CA, lubrication groove and holesNTE100 × 215 × 7310 pcs€84.11−€266.96Request a quote
  • Cross-section drawing to size: Spherical roller, 100 × 215 × 73 mm22320 CCW33 PQCC, lubrication groove and holes, PQ: not decodedNTE100 × 215 × 7310 pcs€100.02−€251.05Request a quote
  • Cross-section drawing to size: Spherical roller, 100 × 215 × 73 mm22320 MBW33 PQMB, lubrication groove and holes, PQ: not decodedNTE100 × 215 × 7310 pcs€118.99−€232.08Request a quote
  • Cross-section drawing to size: Spherical roller, 100 × 215 × 73 mm22320 CW33 PQCW33, PQ: not decodedNTE100 × 215 × 7310 pcs€129.73−€221.34Request a quote
  • Cross-section drawing to size: Spherical roller, 100 × 215 × 73 mm22320 MBW33MB, lubrication groove and holesNTE100 × 215 × 73available to order€94.26−€256.81Request a quote
  • Series illustration (not a photo of this item): 22320 CW3322320 CW33CW33no brand100 × 215 × 73available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 22320 C/W3322320 C/W33C, lubrication groove and holesCT100 × 215 × 73available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 100 × 215 × 73 mm22320 KMBW33MB, lubrication groove and holes, 1:12 tapered boreCT100 × 215 × 73available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 100 × 215 × 73 mm22320 MAW33C4 VBclearance C4, MA, lubrication groove and holes, VB: not decodedCT100 × 215 × 73available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€351.07).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 100 × 215 × 73mm
Cdynamic 847kN
C0static 950kN
mweight 13.5kg

Spherical roller bearing 22320. Under GOST the same bearing is designated 53620.

C, C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 53620?

It is the same bearing under GOST 3189-89: 53620 corresponds to the ISO base 22320. Size 100 × 215 × 73 mm, a full equivalent of 22320.

Will 22320 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet