+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 22316 EK: ⌀80 × ⌀170 × 58 mm⌀170⌀805822316 EK
Fig. 1: 22316 EK, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22316 EK

Load: radial high; axial medium, on both sidesSpherical roller

Bearing SKF 22316 EK

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 22 approximate
d
80 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
170 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
58 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
C
516 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 80 × 170 × 58 from other brands

23 products
Series illustration (not a photo of this item): 22316 EK
You are viewingSKF 22316 EK

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 22316 CW3322316 CW33CW33CT80 × 170 × 5897 pcs€27.58Request a quote
  • Cross-section drawing to size: Spherical roller, 80 × 170 × 58 mm22316 CA/W33CA, lubrication groove and holesCT80 × 170 × 58131 pcs€30.43Request a quote
  • Series illustration (not a photo of this item): 22316 CW3322316 CW33CW33NTE80 × 170 × 589 pcs€40Request a quote
  • Cross-section drawing to size: Spherical roller, 80 × 170 × 58 mm22316 CAW33CA, lubrication groove and holesNTE80 × 170 × 588 pcs€43.08Request a quote
  • Cross-section drawing to size: Spherical roller, 80 × 170 × 58 mm22316 MBW33 PQMB, lubrication groove and holes, PQ: not decodedNTE80 × 170 × 5818 pcs€61.92Request a quote
  • Cross-section drawing to size: Spherical roller, 80 × 170 × 58 mm22316 CW33 PQCW33, PQ: not decodedNTE80 × 170 × 5810 pcs€64.32Request a quote
  • Cross-section drawing to size: Spherical roller, 80 × 170 × 58 mm22316 MBW33MB, lubrication groove and holesNTE80 × 170 × 58available to order€48.28Request a quote
  • Cross-section drawing to size: Spherical roller, 80 × 170 × 58 mm22316 MW33M, lubrication groove and holesno brand80 × 170 × 58available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 22316 CW3322316 CW33CW33AKE80 × 170 × 58available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 80 × 170 × 58 mm22316 MBW33MB, lubrication groove and holesCT80 × 170 × 58available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 80 × 170 × 58mm
Cdynamic 516kN

Spherical roller bearing 22316 K. Under GOST the same bearing is designated 153616.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 153616?

It is the same bearing under GOST 3189-89: 153616 corresponds to the ISO base 22316 K. Size 80 × 170 × 58 mm, a full equivalent of 22316 K.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet