+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 22314 E: ⌀70 × ⌀150 × 51 mm⌀150⌀705122314 E
Fig. 1: 22314 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22314 E

Load: radial high; axial medium, on both sidesSpherical roller

Bearing SKF 22314 E

€141.34per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 25 approximate
d
70 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
150 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
51 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C0
430 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
01

Equivalents

the same size 70 × 150 × 51 from other brands

28 products
Photo: 22314 E
You are viewingSKF 22314 E
€141.34baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Spherical roller, 70 × 150 × 51 mm22314 CA/W33CA, lubrication groove and holesCT70 × 150 × 51107 pcs€21.12−€120.22Request a quote
  • Cross-section drawing to size: Spherical roller, 70 × 150 × 51 mm22314 W33 J C3clearance C3, J, lubrication groove and holesNTE70 × 150 × 51100 pcs€26.27−€115.07Request a quote
  • Cross-section drawing to size: Spherical roller, 70 × 150 × 51 mm22314 CAW33CA, lubrication groove and holesNTE70 × 150 × 5114 pcs€33.85−€107.49Request a quote
  • Cross-section drawing to size: Spherical roller, 70 × 150 × 51 mm22314 CCW33 PQCC, lubrication groove and holes, PQ: not decodedNTE70 × 150 × 5158 pcs€40.71−€100.63Request a quote
  • Cross-section drawing to size: Spherical roller, 70 × 150 × 51 mm22314 MBW33 PQMB, lubrication groove and holes, PQ: not decodedNTE70 × 150 × 5130 pcs€48.76−€92.58Request a quote
  • Cross-section drawing to size: Spherical roller, 70 × 150 × 51 mm22314 CW33 PQCW33, PQ: not decodedNTE70 × 150 × 5110 pcs€50.62−€90.72Request a quote
  • Cross-section drawing to size: Spherical roller, 70 × 150 × 51 mm22314 MBW33MB, lubrication groove and holesNTE70 × 150 × 51available to order€37.93−€103.41Request a quote
  • Series illustration (not a photo of this item): 22314 C/W3322314 C/W33C, lubrication groove and holesCT70 × 150 × 51available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 70 × 150 × 51 mm22314 MAW33C4 VBclearance C4, MA, lubrication groove and holes, VB: not decodedCT70 × 150 × 51available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 70 × 150 × 51 mm22314 MBW33MB, lubrication groove and holesCT70 × 150 × 51available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€141.34).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 70 × 150 × 51mm
C0static 430kN

Spherical roller bearing 22314. Under GOST the same bearing is designated 53614.

C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 53614?

It is the same bearing under GOST 3189-89: 53614 corresponds to the ISO base 22314. Size 70 × 150 × 51 mm, a full equivalent of 22314.

Will 22314 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet