+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 22311 EK/VA405: ⌀55 × ⌀120 × 43 mm⌀120⌀554322311 EK/VA405
Fig. 1: 22311 EK/VA405, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22311 EK/VA405

Load: radial high; axial medium, on both sidesSpherical roller

Bearing SKF 22311 EK/VA405

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 26 approximate
d
55 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
120 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
43 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
C
280 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 55 × 120 × 43 from other brands

28 products
Cross-section drawing to size: Spherical roller, 55 × 120 × 43 mm
You are viewingSKF 22311 EK/VA405

Everything the number specifies matches: series 223, 55 × 120 × 43 mm, open, no protection, E, K, normal clearance, special design. The codes in the number are read against the SKF catalogue.

  • Cross-section drawing to size: Spherical roller, 55 × 120 × 43 mm22311 EK/VA405This bearingSKF55 × 120 × 43available to orderon requestyou are here
  • Series illustration (not a photo of this item): 22311 EK22311 EKSKF55 × 120 × 43available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 55 × 120 × 43mm
Cdynamic 280kN

Spherical roller bearing 22311 K. Under GOST the same bearing is designated 153611.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 153611?

It is the same bearing under GOST 3189-89: 153611 corresponds to the ISO base 22311 K. Size 55 × 120 × 43 mm, a full equivalent of 22311 K.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet