+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 22310 E: ⌀50 × ⌀110 × 40 mm⌀110⌀504022310 E
Fig. 1: 22310 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22310 E

Load: radial high; axial medium, on both sidesSpherical roller

Bearing SKF 22310 E

€77.72per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 23 approximate
d
50 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
110 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
40 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C0
224 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
m
1.9 kg
MassWeight of the product. Source: two supplier sources
01

Equivalents

the same size 50 × 110 × 40 from other brands

26 products
Photo: 22310 E
You are viewingSKF 22310 E
€77.72baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 22310 C/W3322310 C/W33C, lubrication groove and holesCT50 × 110 × 40255 pcs€9.24−€68.48Request a quote
  • Cross-section drawing to size: Spherical roller, 50 × 110 × 40 mm22310 MW33M, lubrication groove and holesCT50 × 110 × 4074 pcs€9.62−€68.10Request a quote
  • Cross-section drawing to size: Spherical roller, 50 × 110 × 40 mm22310 CA/W33CA, lubrication groove and holesCT50 × 110 × 40670 pcs€10.38−€67.34Request a quote
  • Cross-section drawing to size: Spherical roller, 50 × 110 × 40 mm22310 W33 J C3clearance C3, J, lubrication groove and holesNTE50 × 110 × 401,000 pcs€13.03−€64.69Request a quote
  • Series illustration (not a photo of this item): 22310 CW3322310 CW33CW33NTE50 × 110 × 4020 pcs€16.79−€60.93Request a quote
  • Cross-section drawing to size: Spherical roller, 50 × 110 × 40 mm22310 CAW33CA, lubrication groove and holesNTE50 × 110 × 4019 pcs€16.82−€60.90Request a quote
  • Cross-section drawing to size: Spherical roller, 50 × 110 × 40 mm22310 CCW33 PQCC, lubrication groove and holes, PQ: not decodedNTE50 × 110 × 40120 pcs€22.25−€55.47Request a quote
  • Cross-section drawing to size: Spherical roller, 50 × 110 × 40 mm22310 CCKW33 PQCC, lubrication groove and holes, 1:12 tapered bore, PQ: not decodedNTE50 × 110 × 4010 pcs€23.21−€54.51Request a quote
  • Cross-section drawing to size: Spherical roller, 50 × 110 × 40 mm22310 MBW33 PQMB, lubrication groove and holes, PQ: not decodedNTE50 × 110 × 4028 pcs€28.18−€49.54Request a quote
  • Photo: 22310 CC W3322310 CC W33C, lubrication groove and holesZ&S50 × 110 × 40available to order€16.96−€60.76Request a quote

Under the price: the difference from the price of this bearing (€77.72).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 50 × 110 × 40mm
C0static 224kN
mweight 1.9kg

Spherical roller bearing 22310. Under GOST the same bearing is designated 53610.

C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 53610?

It is the same bearing under GOST 3189-89: 53610 corresponds to the ISO base 22310. Size 50 × 110 × 40 mm, a full equivalent of 22310.

Will 22310 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet