+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 22228 CCK/W33: ⌀140 × ⌀250 × 68 mm⌀250⌀1406822228 CCK/W33
Fig. 1: 22228 CCK/W33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22228 CCK/W33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing SKF 22228 CCK/W33

€494.41per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 19 approximate
d
140 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
250 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
68 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
743 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
900 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
14.5 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 140 × 250 × 68 from other brands

20 products
Photo: 22228 CCK/W33
You are viewingSKF 22228 CCK/W33
€494.41baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Spherical roller, 140 × 250 × 68 mm22228 CA/W33CA, lubrication groove and holesCT140 × 250 × 6815 pcs€65.38−€429.03Request a quote
  • Cross-section drawing to size: Spherical roller, 140 × 250 × 68 mm22228 CW33 PQCW33, PQ: not decodedNTE140 × 250 × 6810 pcs€136.07−€358.34Request a quote
  • Cross-section drawing to size: Spherical roller, 140 × 250 × 68 mm22228 MW33M, lubrication groove and holesno brand140 × 250 × 68available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 22228 CW3322228 CW33CW33CT140 × 250 × 68available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 140 × 250 × 68 mm22228 KMBW33MB, lubrication groove and holes, 1:12 tapered boreCT140 × 250 × 68available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 140 × 250 × 68 mm22228 KMBW33+H3128MB, lubrication groove and holes, 1:12 tapered bore, H3128: not decodedCT140 × 250 × 68available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 140 × 250 × 68 mm22228MBW33MB, lubrication groove and holesDYZV140 × 250 × 68available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 140 × 250 × 68 mm22228 E1-XL-K-C4clearance C4, E1, XL, 1:12 tapered boreFAG140 × 250 × 68available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 140 × 250 × 68 mm22228 E1A-XL-ME1A, M, XLFAG140 × 250 × 68available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 140 × 250 × 68 mm22228 KMBW33C3clearance C3, MB, lubrication groove and holes, 1:12 tapered boreKG140 × 250 × 68available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€494.41).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 140 × 250 × 68mm
Cdynamic 743kN
C0static 900kN
mweight 14.5kg

Spherical roller bearing 22228 K. Under GOST the same bearing is designated 113528.

C, C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 113528?

It is the same bearing under GOST 3189-89: 113528 corresponds to the ISO base 22228 K. Size 140 × 250 × 68 mm, a full equivalent of 22228 K.

Will 22228 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet