+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 22226 EK: ⌀130 × ⌀230 × 64 mm⌀230⌀1306422226 EK
Fig. 1: 22226 EK, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22226 EK

Load: radial high; axial medium, on both sidesSpherical roller

Bearing SKF 22226 EK

€391.92per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 18 approximate
d
130 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
230 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
64 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C0
930 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
m
11 kg
MassWeight of the product. Source: two supplier sources
01

Equivalents

the same size 130 × 230 × 64 from other brands

19 products
Photo: 22226 EK
You are viewingSKF 22226 EK
€391.92baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Spherical roller, 130 × 230 × 64 mm22226 KMBW33MB, lubrication groove and holes, 1:12 tapered boreCT130 × 230 × 6414 pcs€48.53−€343.39Request a quote
  • Cross-section drawing to size: Spherical roller, 130 × 230 × 64 mm22226 CA/W33CA, lubrication groove and holesCT130 × 230 × 6439 pcs€51.24−€340.68Request a quote
  • Cross-section drawing to size: Spherical roller, 130 × 230 × 64 mm22226 CW33 PQCW33, PQ: not decodedNTE130 × 230 × 645 pcs€112.85−€279.07Request a quote
  • Photo: 22226 E22226 EESKF130 × 230 × 642 pcs€391.92same priceRequest a quote
  • Cross-section drawing to size: Spherical roller, 130 × 230 × 64 mm22226 CAW33C4clearance C4, CA, lubrication groove and holesCT130 × 230 × 64available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 22226 CW3322226 CW33CW33CT130 × 230 × 64available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 130 × 230 × 64 mm22226KMW33+H3126M, lubrication groove and holes, 1:12 tapered bore, H3126: not decodedCT130 × 230 × 64available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 130 × 230 × 64 mm22226 MBW33MB, lubrication groove and holesCT130 × 230 × 64available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 130 × 230 × 64 mm22226MB/W33MB, lubrication groove and holesDYZV130 × 230 × 64available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 130 × 230 × 64 mm22226-E1E1FAG130 × 230 × 64available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€391.92).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 130 × 230 × 64mm
C0static 930kN
mweight 11kg

Spherical roller bearing 22226 K. Under GOST the same bearing is designated 153526.

C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 153526?

It is the same bearing under GOST 3189-89: 153526 corresponds to the ISO base 22226 K. Size 130 × 230 × 64 mm, a full equivalent of 22226 K.

Will 22226 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet