+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 22216 EK: ⌀80 × ⌀140 × 33 mm⌀140⌀803322216 EK
Fig. 1: 22216 EK, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22216 EK

Load: radial high; axial medium, on both sidesSpherical roller

Bearing SKF 22216 EK

€97.00per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 29 approximate
d
80 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
140 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
33 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
236 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
270 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
m
2 kg
MassWeight of the product. Source: two supplier sources
01

Equivalents

the same size 80 × 140 × 33 from other brands

30 products
Photo: 22216 EK
You are viewingSKF 22216 EK
€97baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Spherical roller, 80 × 140 × 33 mm22216 KW33lubrication groove and holes, 1:12 tapered boreCT80 × 140 × 3350 pcs€8.65−€88.35Request a quote
  • Cross-section drawing to size: Spherical roller, 80 × 140 × 33 mm22216 CAW33CA, lubrication groove and holesNTE80 × 140 × 3310 pcs€18.66−€78.34Request a quote
  • Series illustration (not a photo of this item): 22216 CW3322216 CW33CW33NTE80 × 140 × 3310 pcs€18.75−€78.25Request a quote
  • Cross-section drawing to size: Spherical roller, 80 × 140 × 33 mm22216 CCW33 PQCC, lubrication groove and holes, PQ: not decodedNTE80 × 140 × 3340 pcs€26.48−€70.52Request a quote
  • Cross-section drawing to size: Spherical roller, 80 × 140 × 33 mm22216 MBW33 PQMB, lubrication groove and holes, PQ: not decodedNTE80 × 140 × 3350 pcs€32.39−€64.61Request a quote
  • Photo: 22216 E22216 EESKF80 × 140 × 3316 pcs€87.80−€9.20Request a quote
  • Series illustration (not a photo of this item): 22216 C/W3322216 C/W33C, lubrication groove and holesCT80 × 140 × 33available to order€9.79−€87.21Request a quote
  • Cross-section drawing to size: Spherical roller, 80 × 140 × 33 mm22216 CA/W33CA, lubrication groove and holesCT80 × 140 × 33available to order€13.09−€83.91Request a quote
  • Cross-section drawing to size: Spherical roller, 80 × 140 × 33 mm22216 MBW33MB, lubrication groove and holesNTE80 × 140 × 33available to order€20.92−€76.08Request a quote
  • Cross-section drawing to size: Spherical roller, 80 × 140 × 33 mm22216 CA/W33CA, lubrication groove and holesno brand80 × 140 × 33available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€97).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 80 × 140 × 33mm
Cdynamic 236kN
C0static 270kN
mweight 2kg

Spherical roller bearing 22216 K. Under GOST the same bearing is designated 153516.

C, C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 153516?

It is the same bearing under GOST 3189-89: 153516 corresponds to the ISO base 22216 K. Size 80 × 140 × 33 mm, a full equivalent of 22216 K.

Will 22216 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet