+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 22215 EK: ⌀75 × ⌀130 × 31 mm⌀130⌀753122215 EK
Fig. 1: 22215 EK, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22215 EK

Load: radial high; axial medium, on both sidesSpherical roller

Bearing SKF 22215 EK

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 16 approximate
d
75 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
130 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
31 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
C
212 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 75 × 130 × 31 from other brands

17 products
Series illustration (not a photo of this item): 22215 EK
You are viewingSKF 22215 EK

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Spherical roller, 75 × 130 × 31 mm22215 CAW33CA, lubrication groove and holesNTE75 × 130 × 3110 pcs€16Request a quote
  • Type diagram, no dimensions: spherical22215 RHRW33RHRW33: not decodedKoyo75 × 130 × ?4 pcs€73.01Request a quote
  • Type diagram, no dimensions: spherical22215 RHRKW33lubrication groove and holes, 1:12 tapered bore, RHR: not decodedKoyo75 × 130 × ?6 pcs€75.21Request a quote
  • Photo: 22215 JB22215 JBJB: not decodedZKL75 × 130 × 31available to order€3.64Request a quote
  • Cross-section drawing to size: Spherical roller, 75 × 130 × 31 mm22215 CA/W33CA, lubrication groove and holesCT75 × 130 × 31available to order€10.74Request a quote
  • Cross-section drawing to size: Spherical roller, 75 × 130 × 31 mm22215MBW33MB, lubrication groove and holesNTE75 × 130 × 31available to order€18.86Request a quote
  • Cross-section drawing to size: Spherical roller, 75 × 130 × 31 mm22215 CAKW33CA, lubrication groove and holes, 1:12 tapered boreno brand75 × 130 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 75 × 130 × 31 mm22215 CKW33C, lubrication groove and holes, 1:12 tapered boreno brand75 × 130 × 31available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 22215 CW3322215 CW33CW33no brand75 × 130 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 75 × 130 × 31 mm22215 E1A-M-C3clearance C3, E1A, MFAG75 × 130 × 31available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 75 × 130 × 31mm
Cdynamic 212kN

Spherical roller bearing 22215 K.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 22215 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet