+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 22213 E: ⌀65 × ⌀120 × 31 mm⌀120⌀653122213 E
Fig. 1: 22213 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22213 E

Load: radial high; axial medium, on both sidesSpherical roller

Bearing SKF 22213 E

€70.08per piece
In stock: 16 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 27 approximate
d
65 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
120 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
31 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
193 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
216 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
01

Equivalents

the same size 65 × 120 × 31 from other brands

29 products
Photo: 22213 E
You are viewingSKF 22213 E
€70.08baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Spherical roller, 65 × 120 × 31 mm22213 KCW33C, lubrication groove and holes, 1:12 tapered boreCT65 × 120 × 3124 pcs€6.05−€64.03Request a quote
  • Cross-section drawing to size: Spherical roller, 65 × 120 × 31 mm22213 CA/W33CA, lubrication groove and holesCT65 × 120 × 319 pcs€10.47−€59.61Request a quote
  • Cross-section drawing to size: Spherical roller, 65 × 120 × 31 mm22213 CA/W33 KCA, lubrication groove and holes, 1:12 tapered boreCT65 × 120 × 31available to order€10.02−€60.06Request a quote
  • Cross-section drawing to size: Spherical roller, 65 × 120 × 31 mm22213 KCAW33CA, lubrication groove and holes, 1:12 tapered boreNTE65 × 120 × 31available to order€13.95−€56.13Request a quote
  • Photo: 22213 EK22213 EKE, 1:12 tapered boreSKF65 × 120 × 31available to order€67.54−€2.54Request a quote
  • Cross-section drawing to size: Spherical roller, 65 × 120 × 31 mm22213 CKW33C, lubrication groove and holes, 1:12 tapered boreno brand65 × 120 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 65 × 120 × 31 mm22213 KCW33C, lubrication groove and holes, 1:12 tapered boreno brand65 × 120 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 65 × 120 × 31 mm22213 KCA/W33CA, lubrication groove and holes, 1:12 tapered boreCT65 × 120 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 65 × 120 × 31 mm22213 ESE, lubrication groove and holesFAG65 × 120 × 31out of stockon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 65 × 120 × 31 mm22213 CCK W33CC, lubrication groove and holes, 1:12 tapered boreISB65 × 120 × 31available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€70.08).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 65 × 120 × 31mm
Cdynamic 193kN
C0static 216kN

Spherical roller bearing 22213.

C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 22213 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet