+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 22212 E: ⌀60 × ⌀110 × 28 mm⌀110⌀602822212 E
Fig. 1: 22212 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22212 E

Load: radial high; axial medium, on both sidesSpherical roller

Bearing SKF 22212 E

€57.86per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 23 approximate
d
60 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
110 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
28 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
156 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
166 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
01

Equivalents

the same size 60 × 110 × 28 from other brands

25 products
Photo: 22212 E
You are viewingSKF 22212 E
€57.86baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Spherical roller, 60 × 110 × 28 mm22212 CA/W33CA, lubrication groove and holesCT60 × 110 × 28391 pcs€8.51−€49.35Request a quote
  • Cross-section drawing to size: Spherical roller, 60 × 110 × 28 mm22212 CAW33CA, lubrication groove and holesNTE60 × 110 × 2818 pcs€12.93−€44.93Request a quote
  • Cross-section drawing to size: Spherical roller, 60 × 110 × 28 mm22212 MBW33 PQMB, lubrication groove and holes, PQ: not decodedNTE60 × 110 × 2847 pcs€22.41−€35.45Request a quote
  • Series illustration (not a photo of this item): 22212 C/W3322212 C/W33C, lubrication groove and holesCT60 × 110 × 28available to order€6.54−€51.32Request a quote
  • Cross-section drawing to size: Spherical roller, 60 × 110 × 28 mm22212 MBW33MB, lubrication groove and holesNTE60 × 110 × 28available to order€14.49−€43.37Request a quote
  • Cross-section drawing to size: Spherical roller, 60 × 110 × 28 mm22212 CCW33 PQCC, lubrication groove and holes, PQ: not decodedNTE60 × 110 × 28available to order€18.29−€39.57Request a quote
  • Photo: 22212 EK22212 EKE, 1:12 tapered boreSKF60 × 110 × 28available to order€57.86same priceRequest a quote
  • Series illustration (not a photo of this item): 22212 CW3322212 CW33CW33no brand60 × 110 × 28available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 60 × 110 × 28 mm22212 KCW33C, lubrication groove and holes, 1:12 tapered boreno brand60 × 110 × 28available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 60 × 110 × 28 mm22212 E1-XL-K-C3clearance C3, E1, XL, 1:12 tapered boreFAG60 × 110 × 28available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€57.86).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 60 × 110 × 28mm
Cdynamic 156kN
C0static 166kN

Spherical roller bearing 22212.

C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 22212 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet