+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 22211 EK: ⌀55 × ⌀100 × 25 mm⌀100⌀552522211 EK
Fig. 1: 22211 EK, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22211 EK

Load: radial high; axial medium, on both sidesSpherical roller

Bearing SKF 22211 EK

€51.18per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 27 approximate
d
55 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
100 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
25 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C0
127 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
01

Equivalents

the same size 55 × 100 × 25 from other brands

28 products
Photo: 22211 EK
You are viewingSKF 22211 EK
€51.18baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 22211 C/W33 single box22211 C/W33 single boxC, lubrication groove and holesCT55 × 100 × 25100 pcs€5.01−€46.17Request a quote
  • Series illustration (not a photo of this item): 22211 C/W3322211 C/W33C, lubrication groove and holesCT55 × 100 × 254 pcs€5.37−€45.81Request a quote
  • Cross-section drawing to size: Spherical roller, 55 × 100 × 25 mm22211 CA/W33CA, lubrication groove and holesCT55 × 100 × 25368 pcs€7.16−€44.02Request a quote
  • Cross-section drawing to size: Spherical roller, 55 × 100 × 25 mm22211 CAW33CA, lubrication groove and holesNTE55 × 100 × 253 pcs€10.67−€40.51Request a quote
  • Cross-section drawing to size: Spherical roller, 55 × 100 × 25 mm22211 CCW33 PQCC, lubrication groove and holes, PQ: not decodedNTE55 × 100 × 25100 pcs€16.29−€34.89Request a quote
  • Type diagram, no dimensions: spherical22211 RHRKW33lubrication groove and holes, 1:12 tapered bore, RHR: not decodedKoyo55 × 100 × ?10 pcs€45.01−€6.17Request a quote
  • Cross-section drawing to size: Spherical roller, 55 × 100 × 25 mm22211 K CA/W33CA, lubrication groove and holes, 1:12 tapered boreCT55 × 100 × 25available to order€5.43−€45.75Request a quote
  • Photo: 22211 CC W3322211 CC W33C, lubrication groove and holesZ&S55 × 100 × 25available to order€13.27−€37.91Request a quote
  • Photo: 22211 E22211 EESKF55 × 100 × 25available to order€52.65+€1.47Request a quote
  • Photo: 22211 CJ W3322211 CJ W33lubrication groove and holes, CJ: not decodedTIMKEN55 × 100 × 25available to order€70.76+€19.58Request a quote

Under the price: the difference from the price of this bearing (€51.18).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 55 × 100 × 25mm
C0static 127kN

Spherical roller bearing 22211 K.

C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 22211 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet