+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 22209 E: ⌀45 × ⌀85 × 23 mm⌀85⌀452322209 E
Fig. 1: 22209 E, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22209 E

Load: radial high; axial medium, on both sidesSpherical roller

Bearing SKF 22209 E

€45.06per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 18 approximate
d
45 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
85 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
23 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
102 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
98 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
01

Equivalents

the same size 45 × 85 × 23 from other brands

20 products
Photo: 22209 E
You are viewingSKF 22209 E
€45.06baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Spherical roller, 45 × 85 × 23 mm22209 CA/W33CA, lubrication groove and holesCT45 × 85 × 23184 pcs€5.47−€39.59Request a quote
  • Cross-section drawing to size: Spherical roller, 45 × 85 × 23 mm22209 CAW33CA, lubrication groove and holesNTE45 × 85 × 2318 pcs€7.69−€37.37Request a quote
  • Type diagram, no dimensions: spherical22209 RHRKW33lubrication groove and holes, 1:12 tapered bore, RHR: not decodedKoyo45 × 85 × ?10 pcs€39.66−€5.40Request a quote
  • Photo: 22209 CC W3322209 CC W33C, lubrication groove and holesZ&S45 × 85 × 23available to order€9.54−€35.52Request a quote
  • Series illustration (not a photo of this item): 22209 CW3322209 CW33CW33no brand45 × 85 × 23available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 45 × 85 × 23 mm22209 KCW33C, lubrication groove and holes, 1:12 tapered boreno brand45 × 85 × 23available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 22209 C/W3322209 C/W33C, lubrication groove and holesCT45 × 85 × 23available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 45 × 85 × 23 mm22209CA/W33CA, lubrication groove and holesDYZV45 × 85 × 23available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 22209 CW3322209 CW33CW33KG45 × 85 × 23available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 22209 CW33C322209 CW33C3clearance C3, CW33KG45 × 85 × 23available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€45.06).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 45 × 85 × 23mm
Cdynamic 102kN
C0static 98kN

Spherical roller bearing 22209. Under GOST the same bearing is designated 3509.

C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 3509?

It is the same bearing under GOST 3189-89: 3509 corresponds to the ISO base 22209. Size 45 × 85 × 23 mm, a full equivalent of 22209.

Will 22209 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet