+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 2218: ⌀90 × ⌀160 × 40 mm⌀160⌀90402218
Fig. 1: 2218, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 2218

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing SKF 2218

€213.30per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
Equivalents
2 exact, 4 approximate
d
90 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
160 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
40 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
70.2 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
28.5 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
01

Equivalents

the same size 90 × 160 × 40 from other brands

6 products
Photo: 2218
You are viewingSKF 2218
€213.30baseline for the price comparison

Everything the number specifies matches: series 22, 90 × 160 × 40 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

  • Photo: 22182218This bearingSKF90 × 160 × 40available to order€213.30you are here
  • Photo: 22182218ZKL90 × 160 × 40available to order€50.99−€162.31Request a quote

Under the price: the difference from the price of this bearing (€213.30).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 90 × 160 × 40mm
Cdynamic 70.2kN
C0static 28.5kN

Self-aligning ball bearing 2218.

C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet