+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 2213 EKTN9: ⌀65 × ⌀120 × 31 mm⌀120⌀65312213 EKTN9
Fig. 1: 2213 EKTN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 2213 EKTN9

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing SKF 2213 EKTN9

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 9 approximate
d
65 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
120 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
31 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
C
57.2 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 65 × 120 × 31 from other brands

10 products
Cross-section drawing to size: Self-aligning ball, 65 × 120 × 31 mm
You are viewingSKF 2213 EKTN9

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 22132213standard designCT65 × 120 × 3139 pcs€6.02Request a quote
  • Cross-section drawing to size: Self-aligning ball, 65 × 120 × 31 mm2213 K TVH C3clearance C3, TVH, 1:12 tapered boreFAG65 × 120 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 65 × 120 × 31 mm2213 K C3clearance C3, 1:12 tapered boreKoyo65 × 120 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 65 × 120 × 31 mm2213KC3 5clearance C3, 5, 1:12 tapered boreNSK65 × 120 × 31available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 2213 ETN9/C32213 ETN9/C3clearance C3, different cage, ESKF65 × 120 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 65 × 120 × 31 mm2213 2RS TVHcontact seals on both sides, TVHFAG65 × 120 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 65 × 120 × 31 mm2213 E 2RS1KTN9/C3contact seals on both sides, clearance C3SKF65 × 120 × 31available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 2213 E-2RS1TN92213 E-2RS1TN9contact seals on both sides, different cage, ESKF65 × 120 × 31available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 65 × 120 × 31 mm2213 EKTN9/C3clearance C3SKF65 × 120 × 31available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 65 × 120 × 31mm
Cdynamic 57.2kN

Self-aligning ball bearing 2213 K.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 2213 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet