+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 2206 ETN9: ⌀30 × ⌀62 × 20 mm⌀62⌀30202206 ETN9
Fig. 1: 2206 ETN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 2206 ETN9

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing SKF 2206 ETN9

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 22 approximate
d
30 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
62 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
20 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
C
23.8 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 30 × 62 × 20 from other brands

24 products
Series illustration (not a photo of this item): 2206 ETN9
You are viewingSKF 2206 ETN9

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 2206 2RS2206 2RScontact seals on both sides, standard designCT30 × 62 × 20available to order€2.07Request a quote
  • Photo: 2206 2RS2206 2RScontact seals on both sides, standard designZ&S30 × 62 × 20available to order€6.30Request a quote
  • Photo: 2206 2RS2206 2RScontact seals on both sides, standard designCX30 × 62 × 20available to order€8.89Request a quote
  • Photo: 2206 E-2RS1TN92206 E-2RS1TN9contact seals on both sidesSKF30 × 62 × 20available to order€22.12Request a quote
  • Series illustration (not a photo of this item): 2206 2RS2206 2RScontact seals on both sides, standard designno brand30 × 62 × 20available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 30 × 62 × 20 mm2206-2RS TNcontact seals on both sides, TNCT30 × 62 × 20available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 30 × 62 × 20 mm2206 2RSTNGC3contact seals on both sides, clearance C3, TNGNEUWEG30 × 62 × 20available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 30 × 62 × 20 mm2206-2RSTNG N YRLN5contact seals on both sides, 5, TNG, Y, groove for a snap ring, RL: not decodedNSK30 × 62 × 20available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 30 × 62 × 20 mm2206K-2RSTNG N YRLN5contact seals on both sides, 5, TNG, Y, groove for a snap ring, 1:12 tapered bore, RL: not decodedNSK30 × 62 × 20available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 30 × 62 × 20 mm2206 2RS TNcontact seals on both sides, TNNTE30 × 62 × 20available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 30 × 62 × 20mm
Cdynamic 23.8kN

Self-aligning ball bearing 2206. Under GOST the same bearing is designated 1506.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 1506?

It is the same bearing under GOST 3189-89: 1506 corresponds to the ISO base 2206. Size 30 × 62 × 20 mm, a full equivalent of 2206.

Will 2206 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet