+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 2205 E-2RS1KTN9/C3: ⌀25 × ⌀52 × 18 mm⌀52⌀25182205 E-2RS1KTN9/C32RS1
Fig. 1: 2205 E-2RS1KTN9/C3, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 2205 E-2RS1KTN9/C3

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing SKF 2205 E-2RS1KTN9/C3

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 13 approximate
d
25 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
52 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
18 mm
Width BRing width. Source: supplier data
Seal
2RS1contact seals on both sides
Clearance
C3
C
14.3 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 25 × 52 × 18 from other brands

14 products
Cross-section drawing to size: Self-aligning ball, 25 × 52 × 18 mm
You are viewingSKF 2205 E-2RS1KTN9/C3

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 2205 2RS2205 2RSnormal clearance, standard designCT25 × 52 × 181 pcs€1.79Request a quote
  • Photo: 2205 2RS P62205 2RS P6normal clearance, precision class P6, standard designBBC-R25 × 52 × 18available to order€3.17Request a quote
  • Photo: 2205 2RS2205 2RSnormal clearance, standard designZ&S25 × 52 × 18out of stock€4.86Request a quote
  • Photo: 2205 E-2RS1TN92205 E-2RS1TN9normal clearance, different cage, ESKF25 × 52 × 18available to order€20.65Request a quote
  • Series illustration (not a photo of this item): 2205 2RS2205 2RSnormal clearance, standard designno brand25 × 52 × 18available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 25 × 52 × 18 mm2205 2RS TNnormal clearance, TNCT25 × 52 × 18available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 25 × 52 × 18 mm2205-2RSTNGnormal clearance, TNGNEUWEG25 × 52 × 18available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 25 × 52 × 18 mm2205-2RSTNG N YRLN55, TNG, Y, groove for a snap ring, RL: not decodedNSK25 × 52 × 18available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 25 × 52 × 18 mm2205 2RS TNnormal clearance, TNNTE25 × 52 × 18available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 25 × 52 × 18 mmS 2205 2RSS: not decodedZEN25 × 52 × 18available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 25 × 52 × 18mm
Cdynamic 14.3kN

Self-aligning ball bearing 2205 K-2RS C3, design 2RS1: contact seals on both sides.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet