+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 16014 C3: ⌀70 × ⌀110 × 13 mm16014 C3
Fig. 1: 16014 C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 16014/C3

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 16014/C3

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
3 exact, 5 approximate
d
70 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
110 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
13 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
C3
C
29.1 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
25 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
01

Equivalents

the same size 70 × 110 × 13 from other brands

8 products
Photo: 16014 C3
You are viewingSKF 16014/C3

Everything the number specifies matches: series 160, 70 × 110 × 13 mm, open, no protection, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

  • Photo: 16014 C316014 C3This bearingSKF70 × 110 × 13out of stockon requestyou are here
  • Series illustration (not a photo of this item): 16014 C316014 C3FAG70 × 110 × 13available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 16014 C316014 C3NTN70 × 110 × 13available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 110d 70B 13
d×D×Bsize 70 × 110 × 13mm
Cdynamic 29.1kN
C0static 25kN

Deep groove ball bearing 16014 C3.

C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet