+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 16011: ⌀55 × ⌀90 × 11 mm16011
Fig. 1: 16011, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 16011

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 16011

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
5 exact, 1 approximate
d
55 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
90 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
11 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
C
20.3 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 55 × 90 × 11 from other brands

6 products
Series illustration (not a photo of this item): 16011
You are viewingSKF 16011

Everything the number specifies matches: series 160, 55 × 90 × 11 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.
02

Details

what this bearing is, questions

About the bearing

D 90d 55B 11
d×D×Bsize 55 × 90 × 11mm
Cdynamic 20.3kN

Deep groove ball bearing 16011. Under GOST the same bearing is designated 7000111.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 7000111?

It is the same bearing under GOST 3189-89: 7000111 corresponds to the ISO base 16011. Size 55 × 90 × 11 mm, a full equivalent of 16011.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet