+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 16010: ⌀50 × ⌀80 × 10 mm16010
Fig. 1: 16010, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 16010

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 16010

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
4 exact, 5 approximate
d
50 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
80 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
10 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
16.8 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
11.4 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
01

Equivalents

the same size 50 × 80 × 10 from other brands

9 products
Photo: 16010
You are viewingSKF 16010

Everything the number specifies matches: series 160, 50 × 80 × 10 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

  • Photo: 1601016010This bearingSKF50 × 80 × 10available to orderon requestyou are here
  • Series illustration (not a photo of this item): 1601016010CT50 × 80 × 10991 pcs€1.15Request a quote
  • Series illustration (not a photo of this item): 1601016010no brand50 × 80 × 10available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 1601016010KG50 × 80 × 10available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 80d 50B 10
d×D×Bsize 50 × 80 × 10mm
Cdynamic 16.8kN
C0static 11.4kN

Deep groove ball bearing 16010. Under GOST the same bearing is designated 7000110.

C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 7000110?

It is the same bearing under GOST 3189-89: 7000110 corresponds to the ISO base 16010. Size 50 × 80 × 10 mm, a full equivalent of 16010.

Will 16010 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet