+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 16008: ⌀40 × ⌀68 × 9 mm16008
Fig. 1: 16008, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 16008

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 16008

€11.68per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
6 exact, 3 approximate
d
40 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
68 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
9 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
13.8 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
10.2 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
01

Equivalents

the same size 40 × 68 × 9 from other brands

9 products
Photo: 16008
You are viewingSKF 16008
€11.68baseline for the price comparison

Everything the number specifies matches: series 160, 40 × 68 × 9 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

Under the price: the difference from the price of this bearing (€11.68).
02

Details

what this bearing is, questions

About the bearing

D 68d 40B 9
d×D×Bsize 40 × 68 × 9mm
Cdynamic 13.8kN
C0static 10.2kN

Deep groove ball bearing 16008. Under GOST the same bearing is designated 7000108.

C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 7000108?

It is the same bearing under GOST 3189-89: 7000108 corresponds to the ISO base 16008. Size 40 × 68 × 9 mm, a full equivalent of 16008.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet