+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 1318: ⌀90 × ⌀190 × 43 mm⌀190⌀90431318
Fig. 1: 1318, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 1318

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing SKF 1318

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
5 exact, 0 approximate
d
90 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
190 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
43 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
117 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
44 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
m
5.8 kg
MassWeight of the product. Source: two supplier sources
01

Equivalents

the same size 90 × 190 × 43 from other brands

5 products
Photo: 1318
You are viewingSKF 1318

Everything the number specifies matches: series 13, 90 × 190 × 43 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 90 × 190 × 43mm
Cdynamic 117kN
C0static 44kN
mweight 5.8kg

Self-aligning ball bearing 1318. Under GOST the same bearing is designated 1318.

C, C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 1318?

It is the same bearing under GOST 3189-89: 1318 corresponds to the ISO base 1318. Size 90 × 190 × 43 mm, a full equivalent of 1318.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet