+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 1317: ⌀85 × ⌀180 × 41 mm⌀180⌀85411317
Fig. 1: 1317, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 1317

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing SKF 1317

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 1 approximate
d
85 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
180 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
41 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
C
97.5 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 85 × 180 × 41 from other brands

2 products
Series illustration (not a photo of this item): 1317
You are viewingSKF 1317

Same size, different design: the difference is written in the row.
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 85 × 180 × 41mm
Cdynamic 97.5kN

Self-aligning ball bearing 1317. Under GOST the same bearing is designated 1317.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 1317?

It is the same bearing under GOST 3189-89: 1317 corresponds to the ISO base 1317. Size 85 × 180 × 41 mm, a full equivalent of 1317.

Will 1317 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet