+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 1315 K/C3: ⌀75 × ⌀160 × 37 mm⌀160⌀75371315 K/C3
Fig. 1: 1315 K/C3, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 1315 K/C3

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing SKF 1315 K/C3

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 9 approximate
d
75 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
160 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
37 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
C3
C
79.3 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 75 × 160 × 37 from other brands

10 products
Series illustration (not a photo of this item): 1315 K/C3
You are viewingSKF 1315 K/C3

Same size, different design: the difference is written in the row.

  • Photo: 1315 K+H1315 K+HH: not decodedGPZ75 × 160 × 37available to order€46.06Request a quote
  • Photo: 13151315normal clearance, standard designZKL75 × 160 × 37available to order€74.03Request a quote
  • Cross-section drawing to size: Self-aligning ball, 75 × 160 × 37 mm1315K+H315H315: not decodedCT75 × 160 × 37available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 13151315normal clearance, standard designNSK75 × 160 × 37available to orderon requestRequest a quote
  • Cross-section drawing to size: Self-aligning ball, 75 × 160 × 37 mm1315K+H315H315: not decodedNTE75 × 160 × 37available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 13151315normal clearance, standard designSKF75 × 160 × 37available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 1315/C31315/C3standard designSKF75 × 160 × 37available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 13151315normal clearance, standard designNTN/SNR75 × 160 × 37available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 1315 K1315 Knormal clearanceZVL75 × 160 × 37available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 75 × 160 × 37mm
Cdynamic 79.3kN

Self-aligning ball bearing 1315 K C3.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet