+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 1308 ETN9: ⌀40 × ⌀90 × 23 mm⌀90⌀40231308 ETN9
Fig. 1: 1308 ETN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 1308 ETN9

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing SKF 1308 ETN9

€33.24per piece
In stock: 18 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 8 approximate
d
40 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
90 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
23 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
33.8 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
11.2 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
01

Equivalents

the same size 40 × 90 × 23 from other brands

9 products
Photo: 1308 ETN9
You are viewingSKF 1308 ETN9
€33.24baseline for the price comparison

Same size, different design: the difference is written in the row.

Under the price: the difference from the price of this bearing (€33.24).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 40 × 90 × 23mm
Cdynamic 33.8kN
C0static 11.2kN

Self-aligning ball bearing 1308. Under GOST the same bearing is designated 1308.

C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 1308?

It is the same bearing under GOST 3189-89: 1308 corresponds to the ISO base 1308. Size 40 × 90 × 23 mm, a full equivalent of 1308.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet