+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 1305 EKTN9: ⌀25 × ⌀62 × 17 mm⌀62⌀25171305 EKTN9
Fig. 1: 1305 EKTN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm
Bearing SKF 1305 EKTN9 — photo 1
Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing SKF 1305 EKTN9

€23.38per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
3 exact, 9 approximate
d
25 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
62 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
17 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
19 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
5.4 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
01

Equivalents

the same size 25 × 62 × 17 from other brands

12 products
Photo: 1305 EKTN9
You are viewingSKF 1305 EKTN9
€23.38baseline for the price comparison

Everything the number specifies matches: series 13, 25 × 62 × 17 mm, open, no protection, K, normal clearance, special design. The codes in the number are read against the SKF catalogue.

  • Photo: 1305 EKTN91305 EKTN9This bearingSKF25 × 62 × 17available to order€23.38you are here
  • Photo: 1305 K1305 KM.G.M.25 × 62 × 17available to order€3.76−€19.62Request a quote
  • Photo: 1305 K1305 KGPZ25 × 62 × 17available to order€5.76−€17.62Request a quote

Under the price: the difference from the price of this bearing (€23.38).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 25 × 62 × 17mm
Cdynamic 19kN
C0static 5.4kN

Self-aligning ball bearing 1305 K.

C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet