+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 1301 ETN9: ⌀12 × ⌀37 × 12 mm⌀37⌀12121301 ETN9
Fig. 1: 1301 ETN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 1301 ETN9

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing SKF 1301 ETN9

€25.96per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 1 approximate
d
12 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
37 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
12 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
9.36 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
2.16 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
01

Equivalents

the same size 12 × 37 × 12 from other brands

2 products
Photo: 1301 ETN9
You are viewingSKF 1301 ETN9
€25.96baseline for the price comparison

Same size, different design: the difference is written in the row.

Under the price: the difference from the price of this bearing (€25.96).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 12 × 37 × 12mm
Cdynamic 9.36kN
C0static 2.16kN

Self-aligning ball bearing 1301. Under GOST the same bearing is designated 1301.

C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 1301?

It is the same bearing under GOST 3189-89: 1301 corresponds to the ISO base 1301. Size 12 × 37 × 12 mm, a full equivalent of 1301.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet