SBN
Drawing of 108: ⌀40 × ⌀68 × 15 mm⌀68⌀4015108
Fig. 1: 108, end view and section; internal parts simplified per ISO 8826-1; GOST number = ISO 6008, dimensions from the GOST↔ISO table CX p.760. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 108

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing SBN 108

Price on request
Available to order

Specifications

Manufacturer number
d
40 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
68 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
15 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 40 × 68 × 15 from other brands

52 products
Cross-section drawing to size: Self-aligning ball, 40 × 68 × 15 mm
You are viewingSBN 108

Everything the number specifies matches: series 1, 40 × 68 × 15 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SBN catalogue.

02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 40 × 68 × 15mm

Self-aligning ball bearing 108.

Frequently asked questions

Will 108 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet