+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 62310 2RS C3: ⌀50 × ⌀110 × 40 mm62310 2RS C32RS
Fig. 1: 62310 2RS C3, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 62310 2RS C3

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing PFI 62310 2RS C3

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
3 exact, 5 approximate
d
50 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
110 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
40 mm
Width BRing width. Source: supplier data
Seal
2RSrubber, both sides
Clearance
C3
01

Equivalents

the same size 50 × 110 × 40 from other brands

8 products
Series illustration (not a photo of this item): 62310 2RS C3
You are viewingPFI 62310 2RS C3

Everything the number specifies matches: series 623, 50 × 110 × 40 mm, contact seals on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the PFI catalogue.

  • Series illustration (not a photo of this item): 62310 2RS C362310 2RS C3This bearingPFI50 × 110 × 40available to orderon requestyou are here
  • Series illustration (not a photo of this item): 62310 2RS C362310 2RS C3SLF50 × 110 × 40available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 62310 2RS C362310 2RS C3ZEN50 × 110 × 40available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 110d 50B 40
d×D×Bsize 50 × 110 × 40mm

Deep groove ball bearing 62310-2RS C3, design 2RS: contact seals on both sides.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet