+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6212 LLUC3/5K: ⌀60 × ⌀110 × 22 mm6212 LLUC3/5KLLU
Fig. 1: 6212 LLUC3/5K, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6212 LLUC3/5K

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NTN 6212 LLUC3/5K

€19.02per piece
In stock: 20 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 47 approximate
d
60 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
110 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
22 mm
Width BRing width. Source: supplier data
Seal
LLUcontact seals on both sides
Clearance
C3
01

Equivalents

the same size 60 × 110 × 22 from other brands

48 products
Drawing: 6212 LLUC3/5K
You are viewingNTN 6212 LLUC3/5K
€19.02baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 6212 ZZ6212 ZZmetal shields on both sides, normal clearance, standard designCT60 × 110 × 22535 pcs€3.30−€15.72Request a quote
  • Series illustration (not a photo of this item): 6212 ZZ6212 ZZmetal shields on both sides, normal clearance, standard designNTE60 × 110 × 22220 pcs€5.13−€13.89Request a quote
  • Series illustration (not a photo of this item): 6212 ZZ6212 ZZmetal shields on both sides, normal clearance, standard designno brand60 × 110 × 22available to order€3.25−€15.77Request a quote
  • Photo: 6212 ZZ6212 ZZmetal shields on both sides, normal clearance, standard designZ&S60 × 110 × 22available to order€8.96−€10.06Request a quote
  • Photo: 6212-2Z6212-2Zmetal shields on both sides, normal clearance, standard designSKF60 × 110 × 22available to order€16.75−€2.27Request a quote
  • Photo: 6212-2Z/C36212-2Z/C3metal shields on both sides, standard designSKF60 × 110 × 22available to order€16.75−€2.27Request a quote
  • Series illustration (not a photo of this item): 6212-2Z/C46212-2Z/C4metal shields on both sides, clearance C4, standard designSKF60 × 110 × 22available to order€22.46+€3.44Request a quote
  • Cross-section drawing to size: Deep groove ball, 60 × 110 × 22 mm6212 ZNRshield on one side, normal clearance, groove and snap ringCT60 × 110 × 22available to orderon requestRequest a quote
  • Cross-section drawing to size: Deep groove ball, 60 × 110 × 22 mm6212 Zshield on one side, normal clearance, standard designCT60 × 110 × 22available to orderon requestRequest a quote
  • Cross-section drawing to size: Deep groove ball, 60 × 110 × 22 mm6212NZshield on one side, normal clearance, standard designCT60 × 110 × 22available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€19.02).
02

Details

what this bearing is, questions

About the bearing

D 110d 60B 22
d×D×Bsize 60 × 110 × 22mm

Deep groove ball bearing 6212-2RS C3, design LLU: contact seals on both sides.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet