+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of N313: ⌀65 × ⌀140 × 33 mm⌀140⌀6533N313
Fig. 1: N313, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of N 313

Load: radial high; no axial loadCylindrical roller N

Bearing NTE N 313

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
8 exact, 27 approximate
d
65 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
140 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
33 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
C
212 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
196 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
2.25 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 65 × 140 × 33 from other brands

38 products
Cross-section drawing to size: Cylindrical roller N, 65 × 140 × 33 mm
You are viewingNTE N 313

Size and design match across the brand catalogues. The codes in the number are read against the NTE catalogue.

  • Cross-section drawing to size: Cylindrical roller N, 65 × 140 × 33 mmN313This bearingNTE65 × 140 × 33available to orderon requestyou are here
  • Cross-section drawing to size: Cylindrical roller N, 65 × 140 × 33 mmN 313 single boxCT65 × 140 × 33200 pcs€8.60Request a quote
  • Cross-section drawing to size: Cylindrical roller N, 65 × 140 × 33 mmN 313CT65 × 140 × 33250 pcs€9.17Request a quote
  • Cross-section drawing to size: Cylindrical roller N, 65 × 140 × 33 mmN313MDYZV65 × 140 × 33available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 65 × 140 × 33 mmN313-E-M1FAG65 × 140 × 33available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 65 × 140 × 33 mmN 313KG65 × 140 × 33available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 65 × 140 × 33 mmN 313 WNSK65 × 140 × 33available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 65 × 140 × 33 mmN 313 MVTL65 × 140 × 33available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 65 × 140 × 33mm
Cdynamic 212kN
C0static 196kN
mweight 2.25kg

Cylindrical roller N bearing N313.

C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 313 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet