+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6306 ZR: ⌀30 × ⌀72 × 19 mm⌀72⌀30196306 ZRZR
Fig. 1: 6306 ZR, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6306 ZR

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NTE 6306 ZR

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
3 exact, 78 approximate
d
30 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
72 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
19 mm
Width BRing width. Source: supplier data
Seal
ZRshield on one side
Clearance
normal clearance
C
29.6 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
16 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.35 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 30 × 72 × 19 from other brands

82 products
Series illustration (not a photo of this item): 6306 ZR
You are viewingNTE 6306 ZR

Everything the number specifies matches: series 63, 30 × 72 × 19 mm, shield on one side, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the NTE catalogue.

  • Series illustration (not a photo of this item): 6306 ZR6306 ZRThis bearingNTE30 × 72 × 19available to orderon requestyou are here
  • Series illustration (not a photo of this item): 6306 Z6306 ZCT30 × 72 × 19available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6306 Z6306 ZFKL30 × 72 × 19out of stockon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 72d 30B 19
d×D×Bsize 30 × 72 × 19mm
Cdynamic 29.6kN
C0static 16kN
mweight 0.35kg

Deep groove ball bearing 6306-Z, design ZR: shield on one side. Under GOST the same bearing is designated 60306.

C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 60306?

It is the same bearing under GOST 3189-89: 6 — shield on one side, 0306 corresponds to the ISO base 6306. Size 30 × 72 × 19 mm, a full equivalent of 6306-Z.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet