+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 62205 2RS: ⌀25 × ⌀52 × 18 mm62205 2RS2RS
Fig. 1: 62205 2RS, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 62205 2RS

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NTE 62205 2RS

€1.35per piece
In stock: 90 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
7 exact, 13 approximate
d
25 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
52 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
18 mm
Width BRing width. Source: two supplier sources
Seal
2RSrubber, both sides
Clearance
normal clearance
C
14 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
7.8 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.15 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 25 × 52 × 18 from other brands

22 products
Series illustration (not a photo of this item): 62205 2RS
You are viewingNTE 62205 2RS
€1.35baseline for the price comparison

Everything the number specifies matches: series 622, 25 × 52 × 18 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the NTE catalogue.

Under the price: the difference from the price of this bearing (€1.35).
02

Details

what this bearing is, questions

About the bearing

D 52d 25B 18
d×D×Bsize 25 × 52 × 18mm
Cdynamic 14kN
C0static 7.8kN
mweight 0.15kg

Deep groove ball bearing 62205-2RS, design 2RS: contact seals on both sides.

C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Will 62205 2RS C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet