+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 6220 2RS: ⌀100 × ⌀180 × 34 mm6220 2RS2RS
Fig. 1: 6220 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6220 2RS

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NTE 6220 2RS

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
3 exact, 15 approximate
d
100 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
180 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
34 mm
Width BRing width. Source: supplier data
Seal
2RSrubber, both sides
Clearance
normal clearance
C
127 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
93 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
3.15 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 100 × 180 × 34 from other brands

19 products
Series illustration (not a photo of this item): 6220 2RS
You are viewingNTE 6220 2RS

Everything the number specifies matches: series 62, 100 × 180 × 34 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the NTE catalogue.

  • Series illustration (not a photo of this item): 6220 2RS6220 2RSThis bearingNTE100 × 180 × 34available to orderon requestyou are here
  • Series illustration (not a photo of this item): 6220 2RS6220 2RSCT100 × 180 × 3428 pcs€10.34Request a quote
  • Series illustration (not a photo of this item): 6220 2RS6220 2RSMGK100 × 180 × 34available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 180d 100B 34
d×D×Bsize 100 × 180 × 34mm
Cdynamic 127kN
C0static 93kN
mweight 3.15kg

Deep groove ball bearing 6220-2RS, design 2RS: contact seals on both sides. Under GOST the same bearing is designated 180220.

C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 180220?

It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0220 corresponds to the ISO base 6220. Size 100 × 180 × 34 mm, a full equivalent of 6220-2RS.

Will 6220 2RS C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet