+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6217 2RS: ⌀85 × ⌀150 × 28 mm6217 2RS2RS
Fig. 1: 6217 2RS, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6217 2RS

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NTE 6217 2RS

€10.92per piece
In stock: 6 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
6 exact, 24 approximate
d
85 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
150 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
28 mm
Width BRing width. Source: two supplier sources
Seal
2RSrubber, both sides
Clearance
normal clearance
C
87.1 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
64 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
1.8 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 85 × 150 × 28 from other brands

32 products
Series illustration (not a photo of this item): 6217 2RS
You are viewingNTE 6217 2RS
€10.92baseline for the price comparison

Everything the number specifies matches: series 62, 85 × 150 × 28 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the NTE catalogue.

Under the price: the difference from the price of this bearing (€10.92).
02

Details

what this bearing is, questions

About the bearing

D 150d 85B 28
d×D×Bsize 85 × 150 × 28mm
Cdynamic 87.1kN
C0static 64kN
mweight 1.8kg

Deep groove ball bearing 6217-2RS, design 2RS: contact seals on both sides. Under GOST the same bearing is designated 180217.

C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 180217?

It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0217 corresponds to the ISO base 6217. Size 85 × 150 × 28 mm, a full equivalent of 6217-2RS.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet