+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6209 ZR: ⌀45 × ⌀85 × 19 mm⌀85⌀45196209 ZRZR
Fig. 1: 6209 ZR, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6209 ZR

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NTE 6209 ZR

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 57 approximate
d
45 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
85 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
19 mm
Width BRing width. Source: supplier data
Seal
ZRshield on one side
Clearance
normal clearance
C
35.1 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
21.6 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.41 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 45 × 85 × 19 from other brands

59 products
Cross-section drawing to size: Deep groove ball, 45 × 85 × 19 mm
You are viewingNTE 6209 ZR

Everything the number specifies matches: series 62, 45 × 85 × 19 mm, shield on one side, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the NTE catalogue.

  • Cross-section drawing to size: Deep groove ball, 45 × 85 × 19 mm6209 ZRThis bearingNTE45 × 85 × 19available to orderon requestyou are here
  • Cross-section drawing to size: Deep groove ball, 45 × 85 × 19 mm6209 ZCT45 × 85 × 19available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 85d 45B 19
d×D×Bsize 45 × 85 × 19mm
Cdynamic 35.1kN
C0static 21.6kN
mweight 0.41kg

Deep groove ball bearing 6209-Z, design ZR: shield on one side. Under GOST the same bearing is designated 60209.

C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 60209?

It is the same bearing under GOST 3189-89: 6 — shield on one side, 0209 corresponds to the ISO base 6209. Size 45 × 85 × 19 mm, a full equivalent of 6209-Z.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet