+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6208 N: ⌀40 × ⌀80 × 18 mm⌀80⌀40186208 N
Fig. 1: 6208 N, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6208 N

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NTE 6208 N

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
3 exact, 84 approximate
d
40 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
80 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
18 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
C
29.5 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
19 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.37 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 40 × 80 × 18 from other brands

87 products
Series illustration (not a photo of this item): 6208 N
You are viewingNTE 6208 N

Everything the number specifies matches: series 62, 40 × 80 × 18 mm, open, no protection, N, normal clearance, special design. The codes in the number are read against the NTE catalogue.

  • Series illustration (not a photo of this item): 6208 N6208 NThis bearingNTE40 × 80 × 18available to orderon requestyou are here
  • Series illustration (not a photo of this item): 6208 N6208 NCT40 × 80 × 18196 pcs€1.18Request a quote
  • Series illustration (not a photo of this item): 6208 N6208 NKG40 × 80 × 18available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 80d 40B 18
d×D×Bsize 40 × 80 × 18mm
Cdynamic 29.5kN
C0static 19kN
mweight 0.37kg

Deep groove ball bearing 6208. Under GOST the same bearing is designated 208.

C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 208?

It is the same bearing under GOST 3189-89: 208 corresponds to the ISO base 6208. Size 40 × 80 × 18 mm, a full equivalent of 6208.

Will 6208 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet