+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6026: ⌀130 × ⌀200 × 33 mm6026
Fig. 1: 6026, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6026

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NTE 6026

€25.79per piece
In stock: 5 pcs
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
5 exact, 5 approximate
d
130 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
200 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
33 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
112 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
100 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
3.15 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 130 × 200 × 33 from other brands

10 products
Series illustration (not a photo of this item): 6026
You are viewingNTE 6026
€25.79baseline for the price comparison

Everything the number specifies matches: series 60, 130 × 200 × 33 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the NTE catalogue.

  • Series illustration (not a photo of this item): 60266026This bearingNTE130 × 200 × 335 pcs€25.79you are here
  • Series illustration (not a photo of this item): 60266026CT130 × 200 × 3333 pcs€16.11−€9.68Request a quote
  • Series illustration (not a photo of this item): 60266026DYZV130 × 200 × 33available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 60266026KG130 × 200 × 33available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 60266026SKF130 × 200 × 33available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€25.79).
02

Details

what this bearing is, questions

About the bearing

D 200d 130B 33
d×D×Bsize 130 × 200 × 33mm
Cdynamic 112kN
C0static 100kN
mweight 3.15kg

Deep groove ball bearing 6026. Under GOST the same bearing is designated 126.

C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 126?

It is the same bearing under GOST 3189-89: 126 corresponds to the ISO base 6026. Size 130 × 200 × 33 mm, a full equivalent of 6026.

Will 6026 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet