+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 6009 2Z: ⌀45 × ⌀75 × 16 mm6009 2Z2Z
Fig. 1: 6009 2Z, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6009 2Z

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NTE 6009 2Z

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
9 exact, 38 approximate
d
45 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
75 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
16 mm
Width BRing width. Source: supplier data
Seal
2Zmetal shields on both sides
Clearance
normal clearance
C
22.1 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
14.6 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.25 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 45 × 75 × 16 from other brands

49 products
Series illustration (not a photo of this item): 6009 2Z
You are viewingNTE 6009 2Z

Everything the number specifies matches: series 60, 45 × 75 × 16 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the NTE catalogue.
02

Details

what this bearing is, questions

About the bearing

D 75d 45B 16
d×D×Bsize 45 × 75 × 16mm
Cdynamic 22.1kN
C0static 14.6kN
mweight 0.25kg

Deep groove ball bearing 6009-ZZ, design 2Z: metal shields on both sides. Under GOST the same bearing is designated 80109.

C, C₀, m: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 80109?

It is the same bearing under GOST 3189-89: 8 — metal shields on both sides, 0109 corresponds to the ISO base 6009. Size 45 × 75 × 16 mm, a full equivalent of 6009-ZZ.

Will 6009 2Z C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet