+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 22338 MBW33: ⌀190 × ⌀400 × 132 mm⌀400⌀19013222338 MBW33
Fig. 1: 22338 MBW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22338 MBW33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing NTE 22338 MBW33

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 3 approximate
d
190 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
400 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
132 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 190 × 400 × 132 from other brands

6 products
Cross-section drawing to size: Spherical roller, 190 × 400 × 132 mm
You are viewingNTE 22338 MBW33

Everything the number specifies matches: series 223, 190 × 400 × 132 mm, open, no protection, normal clearance, special design. The codes in the number are read against the NTE catalogue.

  • Cross-section drawing to size: Spherical roller, 190 × 400 × 132 mm22338 MBW33This bearingNTE190 × 400 × 132available to orderon requestyou are here
  • Cross-section drawing to size: Spherical roller, 190 × 400 × 132 mm22338MBW33CT190 × 400 × 132available to order€324.45Request a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 190 × 400 × 132mm

Spherical roller bearing 22338. Under GOST the same bearing is designated 3638.

Frequently asked questions

What is 3638?

It is the same bearing under GOST 3189-89: 3638 corresponds to the ISO base 22338. Size 190 × 400 × 132 mm, a full equivalent of 22338.

Will 22338 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet