+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 22207 CW33: ⌀35 × ⌀72 × 23 mm⌀72⌀352322207 CW33
Fig. 1: 22207 CW33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 22207 CW33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing NTE 22207 CW33

€6.67per piece
In stock: 26 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
5 exact, 13 approximate
d
35 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
72 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
23 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
0.436 kg
MassWeight of the product. Source: two supplier sources
01

Equivalents

the same size 35 × 72 × 23 from other brands

18 products
Series illustration (not a photo of this item): 22207 CW33
You are viewingNTE 22207 CW33
€6.67baseline for the price comparison

Everything the number specifies matches: series 222, 35 × 72 × 23 mm, open, no protection, normal clearance, special design. The codes in the number are read against the NTE catalogue.

Under the price: the difference from the price of this bearing (€6.67).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 35 × 72 × 23mm
mweight 0.436kg

Spherical roller bearing 22207.

M: NTE data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 22207 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet