+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 6819DD AS2S5: ⌀95 × ⌀120 × 13 mm6819DD AS2S5DD
Fig. 1: 6819DD AS2S5, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6819DD AS2S5

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NSK 6819DD AS2S5

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 2 approximate
d
95 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
120 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
13 mm
Width BRing width. Source: supplier data
Seal
DDcontact seals on both sides
Clearance
normal clearance
01

Equivalents

the same size 95 × 120 × 13 from other brands

4 products
Drawing: 6819DD AS2S5
You are viewingNSK 6819DD AS2S5

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 61819 ZZ61819 ZZmetal shields on both sides, standard designCT95 × 120 × 13available to orderon requestRequest a quote
  • Type diagram, no dimensions: ball61819 Y/C3clearance C3, Y: not decodedINA95 × 120 × ?available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 120d 95B 13
d×D×Bsize 95 × 120 × 13mm

Deep groove ball bearing 6819-2RS, design DD: contact seals on both sides.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Will 6819 DD C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet