+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 6407 5: ⌀35 × ⌀100 × 25 mm6407 5
Fig. 1: 6407 5, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6407 5

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NSK 6407 5

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 7 approximate
d
35 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
100 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
25 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 35 × 100 × 25 from other brands

8 products
Drawing: 6407 5
You are viewingNSK 6407 5

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 64076407standard designCT35 × 100 × 256 pcs€3.59Request a quote
  • Cross-section drawing to size: Deep groove ball, 35 × 100 × 25 mm6407 Ngroove for a snap ringCT35 × 100 × 25available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 64076407standard designKG35 × 100 × 25available to orderon requestRequest a quote
  • Cross-section drawing to size: Deep groove ball, 35 × 100 × 25 mm6407 NRgroove and snap ringNKE35 × 100 × 25available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6407 C36407 C3clearance C3, standard designNTE35 × 100 × 25available to orderon requestRequest a quote
  • Drawing: 6407 2RS6407 2RScontact seals on both sides, standard designCT35 × 100 × 25available to order€3.04Request a quote
  • Drawing: 6407 2RS6407 2RScontact seals on both sides, standard designIBB35 × 100 × 25available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 100d 35B 25
d×D×Bsize 35 × 100 × 25mm

Deep groove ball bearing 6407. Under GOST the same bearing is designated 407.

Frequently asked questions

What is 407?

It is the same bearing under GOST 3189-89: 407 corresponds to the ISO base 6407. Size 35 × 100 × 25 mm, a full equivalent of 6407.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet