+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 6312DDUC3E AS2S5: ⌀60 × ⌀130 × 31 mm6312DDUC3E AS2S5DDU
Fig. 1: 6312DDUC3E AS2S5, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6312DDUC3E AS2S5

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NSK 6312DDUC3E AS2S5

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 45 approximate
d
60 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
130 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
31 mm
Width BRing width. Source: supplier data
Seal
DDUcontact seals on both sides
Clearance
C3
01

Equivalents

the same size 60 × 130 × 31 from other brands

46 products
Drawing: 6312DDUC3E AS2S5
You are viewingNSK 6312DDUC3E AS2S5

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 6312 ZZ C36312 ZZ C3metal shields on both sides, standard designCT60 × 130 × 3158 pcs€5.07Request a quote
  • Series illustration (not a photo of this item): 6312 ZZ6312 ZZmetal shields on both sides, normal clearance, standard designCT60 × 130 × 31222 pcs€6.49Request a quote
  • Series illustration (not a photo of this item): 6312 ZZ C36312 ZZ C3metal shields on both sides, standard designNTE60 × 130 × 311,099 pcs€9.24Request a quote
  • Series illustration (not a photo of this item): 6312 ZZ6312 ZZmetal shields on both sides, normal clearance, standard designNTE60 × 130 × 3165 pcs€9.63Request a quote
  • Photo: 6312 ZZ6312 ZZmetal shields on both sides, normal clearance, standard designZ&S60 × 130 × 31available to order€16.61Request a quote
  • Drawing: 6312-C-2Z-C36312-C-2Z-C3metal shields on both sides, CFAG60 × 130 × 31available to order€25.89Request a quote
  • Photo: 6312-2Z6312-2Zmetal shields on both sides, normal clearance, standard designSKF60 × 130 × 31available to order€29.45Request a quote
  • Series illustration (not a photo of this item): 6312-2Z/C36312-2Z/C3metal shields on both sides, standard designSKF60 × 130 × 31available to order€32.53Request a quote
  • Series illustration (not a photo of this item): 6312 ZZ6312 ZZmetal shields on both sides, normal clearance, standard designno brand60 × 130 × 31available to orderon requestRequest a quote
  • Type diagram, no dimensions: ball6312 BHTS ZZ 280°metal shields on both sides, normal clearance, BHTSBECO60 × 130 × ?available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 130d 60B 31
d×D×Bsize 60 × 130 × 31mm

Deep groove ball bearing 6312-2RS C3, design DDU: contact seals on both sides.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet