+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6211C3E D 5: ⌀55 × ⌀100 × 21 mm⌀100⌀55216211C3E D 5D
Fig. 1: 6211C3E D 5, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6211C3E D 5

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NSK 6211C3E D 5

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 47 approximate
d
55 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
100 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
21 mm
Width BRing width. Source: supplier data
Seal
Dcontact seal on one side
Clearance
C3
01

Equivalents

the same size 55 × 100 × 21 from other brands

48 products
Cross-section drawing to size: Deep groove ball, 55 × 100 × 21 mm
You are viewingNSK 6211C3E D 5

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 6211 ZZ6211 ZZmetal shields on both sides, normal clearance, standard designNTE55 × 100 × 21100 pcs€4.23Request a quote
  • Photo: 6211 ZZ6211 ZZmetal shields on both sides, normal clearance, standard designCT55 × 100 × 21available to order€2.43Request a quote
  • Photo: 6211 ZZ6211 ZZmetal shields on both sides, normal clearance, standard designROM55 × 100 × 21available to order€4.23Request a quote
  • Photo: 6211 ZZ6211 ZZmetal shields on both sides, normal clearance, standard designZ&S55 × 100 × 21available to order€7.13Request a quote
  • Photo: 6211 2Z/C36211 2Z/C3metal shields on both sides, standard designSKF55 × 100 × 21available to order€12.90Request a quote
  • Photo: 6211-2Z6211-2Zmetal shields on both sides, normal clearance, standard designSKF55 × 100 × 21available to order€13.58Request a quote
  • Series illustration (not a photo of this item): 6211 ZZ6211 ZZmetal shields on both sides, normal clearance, standard designno brand55 × 100 × 21available to orderon requestRequest a quote
  • Type diagram, no dimensions: ball6211 BHTS ZZ 350 BECO PLUSmetal shields on both sides, BHTS, 350, BECO, PLUS: not decodedBECO55 × 100 × ?available to orderon requestRequest a quote
  • Cross-section drawing to size: Deep groove ball, 55 × 100 × 21 mm6211 Zshield on one side, normal clearance, standard designCT55 × 100 × 21available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6211-2Z6211-2Zmetal shields on both sides, normal clearance, standard designFAG55 × 100 × 21available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 100d 55B 21
d×D×Bsize 55 × 100 × 21mm

Deep groove ball bearing 6211-RS C3, design D: contact seal on one side.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet