+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6208CM D 5: ⌀40 × ⌀80 × 18 mm⌀80⌀40186208CM D 5D
Fig. 1: 6208CM D 5, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6208CM D 5

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NSK 6208CM D 5

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 84 approximate
d
40 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
80 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
18 mm
Width BRing width. Source: supplier data
Seal
Dcontact seal on one side
Clearance
CM
01

Equivalents

the same size 40 × 80 × 18 from other brands

87 products
Cross-section drawing to size: Deep groove ball, 40 × 80 × 18 mm
You are viewingNSK 6208CM D 5

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 6208 2RS6208 2RScontact seals on both sides, normal clearance, standard designCT40 × 80 × 18176 pcs€1.32Request a quote
  • Series illustration (not a photo of this item): 6208 2RS C36208 2RS C3contact seals on both sides, clearance C3, standard designNTE40 × 80 × 18480 pcs€2.13Request a quote
  • Series illustration (not a photo of this item): 6208 2RS6208 2RScontact seals on both sides, normal clearance, standard designNTE40 × 80 × 181,692 pcs€2.22Request a quote
  • Cross-section drawing to size: Deep groove ball, 40 × 80 × 18 mmK 6208 2RScontact seals on both sides, K: not decodedCT40 × 80 × 18294 pcs€2.33Request a quote
  • Drawing: SS 6208 2RSSS 6208 2RScontact seals on both sides, normal clearance, stainless steelCT40 × 80 × 1849 pcs€6.45Request a quote
  • Series illustration (not a photo of this item): 6208 2NSE6208 2NSEcontact seals on both sides, normal clearance, standard designNACHI40 × 80 × 1835 pcs€6.49Request a quote
  • Series illustration (not a photo of this item): 6208 2HRS6208 2HRScontact seals on both sides, normal clearance, standard designFAG40 × 80 × 1898 pcs€6.83Request a quote
  • Series illustration (not a photo of this item): 6208 2RSR C36208 2RSR C3contact seals on both sides, clearance C3, standard designFAG40 × 80 × 18190 pcs€7.27Request a quote
  • Series illustration (not a photo of this item): 6208 2RS C36208 2RS C3contact seals on both sides, clearance C3, standard designKoyo40 × 80 × 1885 pcs€7.69Request a quote
  • Series illustration (not a photo of this item): 6208 2RSCM6208 2RSCMcontact seals on both sides, standard designKoyo40 × 80 × 1850 pcs€8.65Request a quote
02

Details

what this bearing is, questions

About the bearing

D 80d 40B 18
d×D×Bsize 40 × 80 × 18mm

Deep groove ball bearing 6208-RS, design D: contact seal on one side. Under GOST the same bearing is designated 160208.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 160208?

It is the same bearing under GOST 3189-89: 16 — contact seal on one side, 0208 corresponds to the ISO base 6208. Size 40 × 80 × 18 mm, a full equivalent of 6208-RS.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet