+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6206CM D 5: ⌀30 × ⌀62 × 16 mm⌀62⌀30166206CM D 5D
Fig. 1: 6206CM D 5, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6206CM D 5

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing NSK 6206CM D 5

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
1 exact, 89 approximate
d
30 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
62 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
16 mm
Width BRing width. Source: supplier data
Seal
Dcontact seal on one side
Clearance
CM
01

Equivalents

the same size 30 × 62 × 16 from other brands

91 products
Cross-section drawing to size: Deep groove ball, 30 × 62 × 16 mm
You are viewingNSK 6206CM D 5

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 6206 2RS6206 2RScontact seals on both sides, normal clearance, standard designCT30 × 62 × 1610,167 pcs€0.84Request a quote
  • Series illustration (not a photo of this item): 6206 2RS C36206 2RS C3contact seals on both sides, clearance C3, standard designCT30 × 62 × 1680 pcs€0.88Request a quote
  • Series illustration (not a photo of this item): 6206 2RSC36206 2RSC3contact seals on both sides, clearance C3, standard designNTE30 × 62 × 163,307 pcs€1.14Request a quote
  • Series illustration (not a photo of this item): 6206 2RS6206 2RScontact seals on both sides, normal clearance, standard designNTE30 × 62 × 165,683 pcs€1.20Request a quote
  • Drawing: SS 6206 2RSSS 6206 2RScontact seals on both sides, normal clearance, stainless steelCT30 × 62 × 16237 pcs€3.34Request a quote
  • Series illustration (not a photo of this item): 6206 2NSE C36206 2NSE C3contact seals on both sides, clearance C3, standard designNACHI30 × 62 × 1642 pcs€3.67Request a quote
  • Series illustration (not a photo of this item): 6206 2RS6206 2RScontact seals on both sides, normal clearance, standard designKoyo30 × 62 × 16349 pcs€4.41Request a quote
  • Drawing: 6206 LLUC3/5K6206 LLUC3/5Kcontact seals on both sides, clearance C3, 5KNTN30 × 62 × 1637 pcs€5.26Request a quote
  • Type diagram, no dimensions: ball6206 LLUCM/5Kcontact seals on both sides, 5K, CM: not decodedNTN30 × 62 × ?40 pcs€5.26Request a quote
  • Series illustration (not a photo of this item): 6206 2NSE NR6206 2NSE NRcontact seals on both sides, normal clearance, groove and snap ringNACHI30 × 62 × 1648 pcs€5.56Request a quote
02

Details

what this bearing is, questions

About the bearing

D 62d 30B 16
d×D×Bsize 30 × 62 × 16mm

Deep groove ball bearing 6206-RS, design D: contact seal on one side. Under GOST the same bearing is designated 160206.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 160206?

It is the same bearing under GOST 3189-89: 16 — contact seal on one side, 0206 corresponds to the ISO base 6206. Size 30 × 62 × 16 mm, a full equivalent of 6206-RS.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet